Setting up voice (VOIP) on the MicroSIP Soft phone
Posted by Gagan Singh on 31 March 2020 07:03 PM

MicroSIP is an open-source portable SIP softphone. It is based on PJSIP stack for Windows Operating System & supports high-quality VoIP calls via SIP protocol.

Go to this link to download MicroSIP for Windows PC: MicroSIP download

Once downloaded then install it on your PC.

Follow the steps below to configure SIP settings on MicroSIP;

A) Open MicroSIP App.


B) Click on the dropdown arrow on the top right to open the Menu.

C) Select “Add Account”.

D) Enter the SIP configuration detail provided by your VOIP provider.
  1. Account Name: <Name - Extension Number>
  2. SIP Server: <SIP realm>
  3. Username: <Your extension number>
  4. Domain: <SIP realm>
  5. Login<SIP username>
  6. Password: <SIP username>
  7. Display Name: <Name - Extension Number>
  8. Transport: <Auto>  (Note: If Auto doesn't work then try using only TCP or UDP)
  9. Select Publish Presence”.
  10. Click Save”.

E) To update the settings of a SIP account.

  • Open the "Menu" and select  "Settings" or press “Ctrl+P” on your keyboard.

F) The following are the recommended settings. However, you can update the settings as per your own requirements.
  1. Make sure"Single Call Mode" is NOT selected
  2. Make sure "Bring to Front on Incoming Call" is selected.
  3. Make sure "Random Popup Position" is NOT selected.
  4. Ring Device is selected asDefault.
  5. Speaker is selected as Default.
  6. Microphone is selected as Default.
  7. Click “Save” to apply the changes.