Knowledgebase
Setting up your ZyXEL Router for VDSL
Posted by Jarred Burrowes on 20 December 2016 05:17 PM

ZyXEL VMG8324-B10A: Check VDSL Settings

1. Logon to the ZyXEL Web Interface using your web browser (http://192.168.1.1).
  • Username: admin
  • Password: 1234
 
2. On the Connection Status (Network Map) page, If you are presented with the Quick Start window > tick Don't automatically show this Quick Start after login > click Close.
    Hover over Network Setting> click Broadband.



3. On the Broadband page, on the Broadband tab (default) > for the VDSL entry> under Modify, click Edit (pencil Icon).



4. On the WAN Configuration edit window, ensure you scroll through and verify the following settings are shown/specified below:

  • General
    • Active [Ticked]
    • Mode: Routing
    • Encapsulation: PPPoE
    • IPv6/IPv4 Mode: IPv6/IPv4 DualStack (you can also use IPv4 Only)

  • PPP Information
    • PPP User Name: [user]@dsl.vygr.net (NOTE: [user] is your unique user name and can be found on your Build Doc)
    • PPP Password: (Your Account password that was assigned to you). 
    • PPP Trigger Type: [Auto Connect]
    • PPPoE Service Name : [Nothing Specified]
    • PPPoE Passthrough : [Unticked]

  • IP Address
    • Obtain an IP Address Automatically [Ticked]

  • Routing Feature
    • NAT Enable: [Ticked]
    • Fullcone NAT Enable : [Unticked]
    • IGMP Proxy Enable : [Ticked]
    • Apply as Default Gateway : [Ticked]

  • DNS server
    • DNS: [Static]
    • DNS Server 1: 114.23.1.1
    • DNS Server 2: 114.23.2.2

  • IPv6 Address
    • IPv6 Address: 
      • [Automatic is selected]
      • Get IPv6 Address From DHCPv6 Server(IA_NA) [Unticked]
      • Prefix Delegation(IA_PD) [Ticked]

  • IPv6 Routing Feature
    • MLD Proxy Enable : [Unticked]
    • Apply as Default Gateway [Unticked]

  • IPv6 DNS Server
    • IPv6 DNS : [Dynamic]

  • VLAN
    • Active : [Ticked]
    • 802.1p : 0
    • 802.1q : 10

  • QoS
    • Rate Limit : [Nothing Specified]
    • WAN Outgoing Default Tag : [Disabled]

  • MTU
    • MTU Size : 1492

Click Apply.



5. Click the Connection Status (button situated on the bottom left), ensure you see a Green connection between your ZyXEL Router and the Internet icon.



NOTE: If bundled with your plan, you may also wish to setup your VOIP (SIP) Subscription.