First time setup guide for your Voyager Huawei HG659 Router
Posted by Jay Wattage on 04 November 2019 05:04 PM
Before you begin
CONNECTING TO FIBRE
1 - Plug one end of the Blue Network/Ethernet cable into the LAN1/GE1 (or LAN2/GE2 if advised) port on the Fibre ONT. Plug the other end into the Blue WAN port on the router.
2 - [Optional] Plug one end of the Yellow Network/Ethernet cable to any of the Yellow LAN ports on the router. Plug the other end to your Laptop, Desktop or other wired device.
3 - [Voice Plan Only] Plug one end of another DSL/Phone cable to the Phone 1 port on the router. Plug the other end to your existing phone handset.
4 - Plug the power supply into a power point on the wall and the power cable into the router’s power supply port. Press the On/Off button, located on the side of the router, and wait 5 minutes before attempting to connect.
5 - WIFI INFO Your default Wireless Network Name (SSID) for 2.4Ghz WIFI, and SSID(5G) for 5Ghz WIFI can be found on the back of your router, along with your WIFI Password (WLAN Key). Click here for our detailed WiFi Guide.
B - WAN - Steady green light indicates your Voyager broadband connection is activated. Blinking indicates it's attempting to activate.
C - Internet - Steady green light indicates the router has logged into the broadband service with your Voyager username and password. Fast blinking indicates data is being transmitted.
D - WLAN - Steady green light indicates WiFi is activated. Fast blinking indicates data is being transmitted.
E - VoIP - Steady green light indicates Voice (Phone) service is registered. Blinking indicates the service is in use.
ACCESSING THE WEB USER INTERFACE
If you are still experiencing any difficulty with getting connected, please talk to us on 0800 477 333 (8AM to 10PM, 7 days a week)
I want to: